Abus FU9001 Spécifications Page 52

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 101
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 51
7-52
7.4
33
Outputs
Under Outputs, you program the relay and transistor outputs of the system. You link different system events to the activation of the
outputs. The following is an overview of the menu options according to their sequence in the Outputs menu:
33
11
Define, page 7-52
33
22
Output A, page 7-57
33
33
Output B, page 7-57
To access the Outputs menu:
In the installer menu, press
33
or press
or until you find the number of the Utility Output [3]
menu option. Press . The first submenu appears on the display:
You are now in the Outputs menu and can access the submenus as described in the following sections.
7.4.1
33
11
Define
Under Define, you can program specific outputs.
To access the Define menu:
1. Select the Outputs menu as described on page 54.
2. Under Outputs, press
11
to access the Define menu option.
3. Enter a two-digit number for the output you want to program. Enter a zero (0) and a number from 1 to 9 (for
example: 01, 02 etc.). Then press
. You see the following on the display:
4. You can now program the selected switch output. After defining the event to be followed by the output,
press
and continue with the displayed menus to program the areas (only for outputs that follow an
area; see page 7-56).
Define
Quick-Key Parameter
33
11
UOUO
00
Follow nothing
The switch output follows no event and is therefore deactivated.
33
11
UOUO
11
Follow system
This menu option shows system events.
33
11
UOUO
11
0101
Bell Follow
This switch output is activated if an external sounder is activated. In the case of a
sounder delay, this output is activated following the expiry of the delay period.
Vue de la page 51
1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 100 101

Commentaires sur ces manuels

Pas de commentaire