Abus FU9001 Spécifications télécharger pdf (Page 40)

7-40

Zone Label

Under Zone label, you can define or edit a name up to 15 characters long for each zone.

Under Parameters, press

to access the zone label menu option. You see the

following on the display:

ress to name Zone 01 or enter a different zone number. You see the following

n the display:

Edit the zone name as described on page 8-34.

Zone Partition

Partitions 1–3

Under Partition, you assign zones to different areas. This is necessary in larger systems to

distinguish, for example, between the commercial area (shop) and the private area (home),

when both are monitored by the ABUS wireless alarm system.

nder Parameters, press

to access the Partition menu option. The following

ppears on the display:

Enter a two-digit zone number and press

. You see the following on the display:

NOTE:

You can assign a zone to one or more areas. The Y under the number shows the area

(1, 2, 3) to which the zone is assigned. A zone that is assigned to more than one area is not

monitored until all assigned areas are activated.

Press [1] to [3] to switch the state of the areas between [Y] YES and [N] NO.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 100 101

Pas de commentaire

Abus FU9001 Spécifications Page 40