Abus FU9001 Spécifications télécharger pdf (Page 28)

100

101

7-28

System Control:

Quick-Key Parameter Default Range

2121

Arm Pre-Warning

YES/NO

ES: For the system, or every area for which an automatic activation function was

programmed, a warning signal of 255 seconds is generated on the operating

panels and the alarm system prior to activation.

During this countdown, you can enter a valid user code to delay automatic

activation of the system/area by 45 minutes.

If activation of the system/area is delayed in this way, automatic activation of the

system is deactivated on the following days.

The 255-second warning does not apply to automatic internal activation.

NO: The system/area for which an automatic activation function is programmed is

activated automatically every day, regardless of whether automatic activation is

delayed or not.

2222

Low Battery Arm

YES/NO

ES: The system can be activated even if the standby batteries are not fully

charged or inserted.

NO: The system cannot be activated in the event of a battery fault.

2323

Eng. Tamper NO

YES/NO

ES: The system cannot be activated following a tamper alarm. The program

PIN first has to be entered.

NO: The system can be reactivated following a tamper alarm without the entry

of the program PIN.

2424

Blank Display NO

YES/NO

ES: In operation mode, the LCD display is switched off for one minute after the

last input. To reactivate the display, a valid user PIN must be entered.

NO: The LCD display is always on.

2525

24 Hour Bypass

YES/NO

ES: A user can omit a 24-hour zone.

NO: A user cannot omit a 24-hour zone.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 100 101

Commentaires sur ces manuels

Pas de commentaire

Abus FU9001 Spécifications Page 28

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Abus FU9001