Abus FU9001 Spécifications télécharger pdf (Page 25)

100

101

7-25

7.2.2

System Control

Under System Control, you make settings that control specific functions of the complete system.

NOTE:

Under this menu item, it is important that you press the lozenge button before exiting so that your data is saved. If you

exit the menu by pressing , your settings are lost.

To access the System Control menu option:

1. Select the main menu System as described on page 7-23.

2. In the System menu, press

to get to System Control. You see the following on the display:

3. Select and configure the settings in the System Control menu as follows:

System Control:

Quick-Key Parameter Default Range

0101

Quick arm

YES/NO

ES: No user PIN is necessary for activating the system or an area.

NO: A user PIN is necessary for activating the system or an area. Choose this setting if

the alarm system or an operating panel is accessible to the public or to children.

0202

Quick UO

YES/NO

ES: A user can activate a switch output without a user PIN.

NO: A user PIN is necessary to activate a switch output.

0303

Allow Bypass

YES/NO

ES: A zone can be omitted (excluded from surveillance) by an authorised user.

NO: Omitting zones from surveillance is not possible.

0404

Quick Bypass

YES/NO

ES: No user PIN is required for omitting a zone.

NO: A user PIN is required for omitting a zone.

0505

False Code Trouble

YES/NO

ES: If an incorrect user PIN is entered three times, the operating panel is locked and, if

programmed, an alarm is sent by telephone. Bad PIN input is displayed as a fault on

the operating panel.

NO: If an incorrect user PIN is entered three times, the operating panel is locked and a

local alarm is sounded.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 100 101

Commentaires sur ces manuels

Pas de commentaire

Abus FU9001 Spécifications Page 25

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Abus FU9001