Abus FUAA10011 Instructions d'exploitation télécharger pdf (Page 26)

14 Configuration of the web server

14.3.1 RF-Inputs

1. Name: Name of the zone/specification whose name is used in the zone

display in the “Overview” menu.

2. Bypass (on/off): The selected zone is hidden (i.e. zones can be deactivated).

This function can be used to bypass specific zones and their detectors, when

necessary (e.g. when the detector indicates an empty battery or a detector in

the zone cannot be connected). The bypass is only activated for one arming

procedure, and is then automatically reset.

3. Internal activation: Using the internal activation setting, you can define

whether the affected zone is monitored by internal activation of the alarm

centre. To enable the zone to be internally activated, the regulator must be put

to “On”. After internal activation, only the monitored zones are shown in the

overview. All the remaining zones are deactivated in this mode and displayed

in grey.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 80 81

Pas de commentaire

Abus FUAA10011 Instructions d'exploitation Page 26