Abus FUAA10021 Secvest IP Basic Set Operating instructi Manuel d'utilisateur Page 69
- Page / 81
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
15 Teaching the wireless components
68
When you are finished, press ESC/DEL once. Pressing any other buttons has no
effect on the alarm centre at this point. The bottom LED lights up again permanently.
The main menu is accessed again.
15.2 Menu 2 – Deleting the components
Press SELECT until the second LED from the bottom lights up.
Press SET once to access menu 2.
The LED of a channel with a trained component lights up. Press SELECT repeatedly
until the desired channel lights up. Empty channels are indicated by a flashing LED. If
the LED of the desired channel lights up, press (beeps once) and hold down
ESC/DEL (about 4 seconds) until the alarm centre beeps twice and the channel LED
flashes. The component has been deleted. Repeat this as required to delete all the
corresponding components.
When you are finished, press ESC/DEL once. Pressing any other buttons has no
effect on the alarm centre at this point. The bottom LED lights up again permanently.
The main menu is accessed again and LED 2 lights up again.
15.3 Menu 3 – Selecting the channel settings (channel mode)
Explanation:
A detector is triggered (e.g. window is opened) and sends a status notification
to the alarm centre. If the window is closed again, then the detector sends
another notification of the changed status (closed) to the alarm centre.
If the corresponding channel is activated (detector triggered), then the zone is
also opened. If the channel is deactivated (detector inactive) then the zone is
also closed (providing all other detectors in this zone are also closed).
Some detectors (e.g. wireless panic alarms) do not send a new notification to
the alarm centre after becoming inactive. Resetting of the channel must be
made automatically in the alarm centre for these detectors. In order for this to
be made automatically, the channel attribute for these detectors must be set
to “Impulse”.
Press SELECT until the third LED from the bottom lights up. Press SET once to
access menu 3. The alarm centre beeps twice and the LED shows the first occupied
channel.
Press SELECT until the LED on the channel to be set lights up. Now press SET – the
alarm centre beeps twice again. The LED now indicates the selected setting for the
channel:
• “Impulse” is selected when the LED flashes.
• “Permanent” is selected when the LED lights up permanently.
Press SELECT to change the settings. The LED now indicates the selected setting.
Press SET again to confirm the changes. The alarm centre beeps twice again and
the LED shows the selected channel.
Repeat this process to make the settings for all components.
- Secvest IP 1
- 1. Contents 2
- 2. Preface 3
- 3. Conformity 3
- 4. Meaning of the symbols 4
- 5.3 Power supply 5
- 5.4 Overloading/overvoltage 5
- 5.5 Cables 6
- 5.7 Care and maintenance 7
- 5.8 Accessories 7
- 5.9 Putting into operation 7
- 6. Scope of delivery 8
- 8. Installation 10
- BT2020 11
- 10.1 Display LEDs 12
- 10.2 LED table 12
- Layer 1 Layer 2 12
- Does not light up Lights up 12
- 12. Putting into operation 17
- 13. Enclosed software 18
- 14.1 Login 19
- 14.2 Overview 20
- 14.3.1 RF-Inputs 26
- 14.5 Scheduler 31
- 14.6 Notification 37
- 14.8 GSM 51
- 14.9 System 52
- 14.10 Event Log 65
- 14.11 Logout 66
- 15.6 Menu 6 – Not in use 74
- 17. Resetting an alarm 76
- 18. Maximum system extension 77
- 21. Notes on maintenance 78
- 22. Technical data 79
- 24. Explanation of terms 81
Produits connexes et manuels pour Pour la maison Abus FUAA10021 Secvest IP Basic Set Operating instructi
Pour la maison Abus FU8006 Secvest 2WAY Wireless Alarm Control Panel ( Manuel d'utilisateur
(47 pages)
(47 pages)
Pour la maison Abus FU8007 Secvest 2WAY Base Kit Operating instruction Manuel d'utilisateur
(48 pages)
(48 pages)
Pour la maison Abus FUAA10021 Secvest IP Basic Set Quick operating ins Manuel d'utilisateur
(124 pages)
(124 pages)
Pour la maison Abus FU9001 Privest Wireless Alarm Base Set Operating i Manuel d'utilisateur
(56 pages)
(56 pages)
(80 pages)
Pour la maison Abus FU9001 Privest Wireless Alarm Base Set Installatio Manuel d'utilisateur
(96 pages)
(96 pages)
(110 pages)Maytag MFF2055FRZ manuels
Manuels d'utilisation et guides de l'utilisateur pour Réfrigérateurs Maytag MFF2055FRZ.
Nous fournissons des manuels en pdf 2 Maytag MFF2055FRZ à télécharger gratuitement par type de document : Guide d'utilisation et d'entretien, Guide des dimensions
Commentaires sur ces manuels