Abus FU8380 Instructions d'exploitation télécharger pdf (Page 20)

Jumper A

Sensitivity:

The detector can be set to high

or low sensitivity using jumper A.

The sensitivity can be fine-tuned

in the corresponding setting

range using the potentiometer

(see below).

Jumper B

Multiple-vibration mode:

When the multiple-vibration mode

is activated, the vibration detector

only sends an alarm after

repeated vibrations.

Off

Jumper C

Calibration:

Use this jumper to set the

detector to calibration mode or

normal operation.

Calibrate detector

Normal

Jumper D

LED:

Use this jumper to deactivate/

activate the LED on the detector.

Off

Low

High

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 74 75

Pas de commentaire

Abus FU8380 Instructions d'exploitation Page 20