Abus FU8200 Manuel de service télécharger pdf (Page 39)

3. Press “Send” on the wireless alarm centre.

The centre sends the teach signal to the info

module. After successful teaching of the wireless

alarm centre:

The seven lower LEDs on the info

module stop flashing.

All LEDs light up constantly.

The info module emits a double tone.

4. Confirm the successful teaching procedure on

the wireless alarm centre.

5. Define which partition should be used by the info

module. Select the partition using the jumper.

When a partition has been selected, the info

module emits a double tone again. Only the

green power supply LED is still lit.

The info module has left the learning mode.

The diagram shows the jumper setting for the

different partitions:

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 154 155

Pas de commentaire

Abus FU8200 Manuel de service Page 39