Abus WIRELESS ALARM SYSTEM Instructions d'exploitation Page 28
- Page / 56
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
24
Chapter 4 Remote access by telephone
You can remote-operate the ABUS wireless alarm system using a pushbutton
telephone. You can activate and deactivate your system, control switch outputs, record
messages, and do many other things. To access your alarm system by telephone,
enable the U/D function (Installer menu -> Dialer -> Controls).
4.1
Access to the system
To operate the ABUS wireless alarm system by pushbutton telephone, you first have
to call the system. Then enter your access code and your user PIN via the keypad, and
you can operate your system from a distance. To be able to do this, you first have to
enable the U/D function (Installer menu -> Dialer -> Controls).
To access the system by telephone (remote access):
1. Dial the number of the building in which the alarm system is installed.
Important: Use a pushbutton telephone!
2. Wait until the system answers your call. You hear a brief signal tone. Wait until
this tone stops.
3. Enter your two-digit access PIN (default: 00). If you take longer than 10
seconds doing this, the system starts with the U/D procedure. Then hang up,
wait about 15 minutes and call again.
4. After entering your 2-digit access PIN, you hear the following message: “Hello.
Please enter your user code, followed by [#] ”.
5. Follow this instruction: Enter your user PIN and press [#].
IMPORTANT:
If you do not enter you access PIN within 10 seconds, the system starts with the U/D
procedure. You have to call again. If you enter a bad PIN, you hear the message “Bitte
geben Sie Ihren Benutzer PIN gefolgt von der [#] Taste ein”???.
If you enter 3 invalid PINs, the system hangs up and is blocked for 15 minutes. During
this period, all calls to the system are unanswered. However, event calls by the system
can be received.
6. If your user PIN is accepted, you reach the operation menu.
IMPORTANT:
If an answering machine is in operation, let it ring once, hang up and call again. In this
case, enable Answering Machine Override in the installer menu.
- ABUS WIRELESS ALARM SYSTEM 1
- OPERATING INSTRUCTIONS 1
- SECURITY NOTES 5
- CE DECLARATION 6
- OVERVIEW OF USER COMMANDS 7
- Alarm technology terms 9
- Operating options 13
- Voice messages 14
- LEDs and their meaning 15
- Button functions 17
- State of LCD display 19
- Access to the system 28
- Operation menu 29
- Receiving calls 32
- Chapter 5 User PINs 34
- Deleting user PINs 35
- Setting system time and date 36
- Creating schedules 39
- Local message 41
- Programming macro buttons 42
- Chapter 7 User Menu 44
- Chapter 8 Standby batteries 50
- Chapter 9 Appendix 51
- FAULTS IN THE WIRELESS ZONES 52
- Appendix B: Audible signals 53
- Appendix C: Scheduler 54
- 9.4 Notes 55
- 5INWSUMABEN-B 56
Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Abus WIRELESS ALARM SYSTEM
(46 pages)
(58 pages)
(88 pages)Maytag MFF2055FRZ manuels
Manuels d'utilisation et guides de l'utilisateur pour Réfrigérateurs Maytag MFF2055FRZ.
Nous fournissons des manuels en pdf 2 Maytag MFF2055FRZ à télécharger gratuitement par type de document : Guide d'utilisation et d'entretien, Guide des dimensions
Commentaires sur ces manuels