Abus FU8350 Instructions d'exploitation télécharger pdf (Page 23)

Corner tamper contact

To use the corner tamper contact, proceed as follows:

1. Open the hole on the rear of the sensor. Make sure that

the opening is large enough for the head of the tamper

switch.

2. Attach the enclosed corner tamper bar to the desired

position. Ensure that the pin on the end of the arm is on

the left-hand side.

3. Attach the rear side of the sensor onto the bar and fasten

it to the wall. Ensure that the pin on the bar passes

through the hole on the rear housing side without any

obstructions.

Housing hole

Screw

(

)

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 73 74

Pas de commentaire

Abus FU8350 Instructions d'exploitation Page 23