Abus AZBW20000 Manuel d'utilisateur télécharger pdf (Page 17)

Installation

The electronics must be protected against damp conditions during installation, as this can

seriously damage the device. Use the template supplied to drill the holes for the two fastening

screws on the cable input wall break contact (if used).

See Fig. 1 and 2. Note: For uneven surfaces we recommend using the adapter for the rear

tamper. Remove the front cover of the detector by first loosening the allen screw with the

supplied allen key (Fig. 3.1) and then using provided plastic release tool to release the side

catches (Fig. 3.2). Once the allen screw and both side catches are released, the cover can be

lifted up and out of its groove. (Fig. 3.3)

Optional for wall break contact

Cable holes

Template

Fig. 1

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 87 88

Pas de commentaire

Abus AZBW20000 Manuel d'utilisateur Page 17